Tub Reglazing Services in Boerne, TX
Discover 3 professional tub reglazing businesses in Boerne. Compare reviews, prices, and services.
Boerne sits in the Texas Hill Country about 30 miles northwest of San Antonio, and that location shapes a few things worth knowing before you hire a refinisher. The surrounding Kendall County has grown fast over the last decade, which means the housing stock is a mix of older limestone-clad homes built in the mid-20th century and newer subdivisions that went up during the growth boom. The older homes often have cast-iron tubs with original porcelain glaze, some of it worn down or stained from decades of hard Hill Country water. That mineral-heavy water is a real factor here. Calcium and iron deposits etch into porcelain over time, and a good refinisher will need to acid-etch and thoroughly degloss the surface before applying a new coating.
The newer builds tend toward builder-grade acrylic tubs, which can yellow and scratch faster than porcelain. Reglazing an acrylic tub is absolutely doable, but the prep chemistry differs, so confirm that whoever you hire has done it before.
Weather matters less here than in, say, Houston or the Gulf Coast, but Boerne does get occasional hard freezes in January and February. If your bathroom has poor insulation near an exterior wall, thermal stress can cause new glaze to crack at the caulk line. Any refinisher worth hiring will use a flexible caulk bead at the tub-to-wall joint rather than a rigid compound. Ask about that specifically.
Because this is a smaller market, some providers here drive out from San Antonio and book Boerne jobs on specific days of the week. That means scheduling windows can be tighter than you’d expect. Call ahead and plan for a 1 to 2 week lead time, longer if you’re trying to book in spring when home projects peak across the Hill Country.
The job itself takes most of a day, but the tub typically needs 24 to 48 hours before you can use it. Plan accordingly.
Frequently Asked Questions
How much does tub reglazing typically cost in the Boerne area?
Most standard alcove tubs run $300 to $550 for a professional reglaze in the San Antonio metro region. Clawfoot tubs and fiberglass surrounds cost more, often $500 to $900, because of the additional prep and product required.
How long does a reglazed tub last in Texas heat?
A properly applied glaze can last 10 to 15 years with routine care. The bigger risk in Central Texas isn't heat itself but the freeze-thaw swings that Hill Country winters can bring, which stress grout lines and caulk around the tub perimeter. Keeping that caulk fresh extends the coating's life significantly.
Do I need to leave my home during the reglazing process?
Yes, for at least 2 to 4 hours. The chemical compounds used in refinishing give off fumes that require good ventilation. Most pros will open windows and run exhaust fans, but you, your kids, and pets should be out of the house while the work is underway and for a bit after.
Can a damaged or chipped acrylic tub be reglazed, or only porcelain?
Both can be done. Porcelain-over-cast-iron tubs are the classic candidate, but acrylic and fiberglass units are reglazed regularly. The prep process differs, and a good refinisher will assess the damage depth before committing to a price.
Is there a permit required for tub reglazing in Boerne or Kendall County?
Reglazing is a cosmetic refinishing process, not a plumbing alteration, so it generally doesn't require a permit in Texas. If you're replacing the tub entirely, that's a different conversation with your local building department.
